Advertisement
Intro Section
Please read this instruction carefully before operating the product and keep it for
further reference. All examples and pictures used here are for reference only.
The contents of this manual are subject to change without notice.
CAUTION:
•
•
•
•
•
•
•
•
•
•
•
ii
If the product does not work properly, please contact your dealer or the
nearest service centre. Never attempt to disassemble the camera yourself. We
shall not be responsible for any problems caused by unauthorised repair or
maintenance.
Do not allow water or liquid into the camera while in use.
When using the product, you must be in strict compliance with the electrical
safety regulations of the nation and region.
When the product is mounted on wall or ceiling, the device needs to be firmly
fixed.
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to any physical shock.
If cleaning, please use a clean soft cloth with a little neutral detergent to wipe it
gently.
Do not aim the camera at the sun or in any area where there is bright lighting.
The device may be burned out by a laser beam, so when any laser equipment is
in use, make sure that the surface of the device will not be exposed to the laser
beam.
Do not place the camera in extremely hot, cold , dusty or damp locations, and
do not expose it to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for operating
environment.
Advertisement
