Table of Contents
Advertisement
STEP 4 : cONNEcT SlINgcATcHER TO YOUR
NETwORk
If you plan to connect your SlingCatcher via Ethernet to your home network,
connect one end of the Ethernet cable to the Ethernet jack on the back of
SlingCatcher. Plug the other end into an unused Ethernet port on your router.
STEP 5 : POwER UP SlINgcATcHER
1. Connect the power plug to SlingCatcher.
WARNING: The SlingCatcher power adapter is only for use with SlingCatcher or Slingbox
SOLO or PRO-HD. Do not plug the SlingCatcher power adapter into any other Sling Media
family of products.
2. Plug the power adapter into a power outlet.
3. The Power LED should light up indicating the SlingCatcher is powered on.
6
If your SlingCatcher is not near your router, you can
use SlingLink (not included) to bridge a wired Ethernet
connection between SlingCatcher and your router. Visit
http://www.slingmedia.com for more information.
Power
Advertisement
Table of Contents
