Sling Media SlingCatcher KSAFF0500400W1US User Manual page 5

SETTING UP SLINGCATCHER
IMPORTANT: Before you plug SlingCatcher into an electrical outlet, read the
safety information at the end of this User Guide.
STEP 1 : INSERT BATTERIES IN THE REmOTE
Remove the battery door from the remote control by firmly pressing down on
the Sling logo, located on the top side of the battery door cover, with your thumb
as illustrated below. Hold the main body of the remote with your left hand firm
while pulling the battery door with your right hand.
Sling logo
Press down here.
Once you've removed the battery door, place the batteries in the remote control.
Use the diagram inside the battery compartment to make sure you insert
the batteries correctly. Replace the battery door when finished. Once you've
installed the batteries properly, a red light will appear beneath the SLING (
button when you press any key.
STEP 2 : PlAcE SlINgcATcHER NEAR YOUR TV
Remove SlingCatcher from the packaging and place it near your TV. For the
remote control to work properly, the entire front of the SlingCatcher should be
visible from where you watch TV.
Do not place your SlingCatcher on or near anything that gets hot, such as a stereo amplifier,
transformer, or radiator, etc. Also, don't place anything on top of your SlingCatcher.
)
3