Table of Contents
Advertisement
Note: If the channel list has not yet been downloaded from the SIRIUS data stream, an Updat-
ing City List notification screen will be displayed. Wait 10 minutes and then try selecting a
city again.
Setting the Jump button to a Channel
To set the jump button to any channel other than a traffic channel:
1.
Select the JumpSet menu option. (Figure 7)
2.
Press the MENU button to exit the menu options and return to the Default display
screen. The jump button can now be programmed by tuning to your desired channel
and pressing and holding the Jump button for two seconds, as described in the Setting
Channel Presets section.
Display options
The brightness and contrast of the radio's display screen may be adjusted. To adjust these
settings:
1.
Select the Display Options menu option.
2.
Select one of the following two options:
Brightness: You can set the brightness for the LCD backlight and keypad. Use the
Rotary Knob to adjust the brightness up or down. The bar graph at the bottom of the
display screen will move to indicate the change.
Contrast: This setting adjusts the relationship between the background and the text on
the LCD display screen. Use the Rotary Knob to adjust the contrast up or down. The
bar graph at the bottom of the display screen will move to indicate the change.
(Figure 9) Press the Rotary Knob to select the setting.
[
0
Menu Options
]
figure 8
figure 8
Advertisement
Table of Contents
