Table of Contents
Advertisement
• If your Jump Setting is set to traffi c, pressing the
Jump button will immediately begin searching for
your desired city's traffi c report. The band indicator
on the display will change to the Jump icon to
indicate a Jump search is active. Once your local
traffi c is found, the Receiver will automatically tune to
that channel. You may have to wait up to 4 minutes
for your desired report. Pressing the Jump button
while the receiver is searching will cancel the search.
Pressing the Jump button after the receiver has
tuned to your traffi c report will return to the previous
channel.
• If your Jump Setting is set to JumpSet, pressing the
jump button will immediately tune to your desired
channel. Pressing the Jump button again will return
to the previous channel.
Note: The channel preset for the Jump button remains
the same regardless of which preset bank is currently
selected.
14
Searching for a Channel Preset (P.TUNE
Mode)
It is possible to quickly search through all of your
presets using the Rotary Knob.
1. Press and hold the BAND button to enter the Preset
Tune Mode (P.TUNE).
2. The bottom right portion of the display will change to
highlight the current preset.
3. Turn the Rotary Knob in either direction to move up
or down through your presets. The new channel will
start to play as soon as you stop turning the Rotary
Knob.
• Only stored presets will be displayed, regardless
of what bank they are stored in.
• Presets will be grouped and displayed by preset
bank and number (ex. A-1, A-2...B-1, B-2...C-1,C-
2...) and rotate all the way around back to the
beginning.
Default Display
Streamer Replay SIR-STRC1 User Guide
P.TUNE Display
Advertisement
Table of Contents
