Searching For A Channel Preset (P.tune Mode) - Sirius Satellite Radio SportsterIR SP-R2 User Manual

• If your Jump Setting is set to traffic, pressing the
Jump button will immediately begin searching for
your desired city's traffic report. The band indicator
on the display will change to the Jump icon to
indicate a Jump search is active. Once your local
traffic is found, the Receiver will automatically tune to
that channel. You may have to wait up to 4 minutes
for your desired report. Pressing the Jump button
while the receiver is searching will cancel the search.
Pressing the Jump button after the receiver has
tuned to your traffic report will return to the previous
channel.
• If your Jump Setting is set to JumpSet, pressing the
jump button will immediately tune to your desired
channel. Pressing the Jump button again will return
to the previous channel.
Note: The channel preset for the Jump button
remains the same regardless of which preset bank
is currently selected.
14

Searching for a Channel Preset (P.TUNE Mode)

It is possible to quickly search through all of your
presets using the Rotary Knob.
1. Press and hold the BAND button to enter the Preset
Tune Mode (P.TUNE).
2. The bottom right portion of the display will change to
highlight the current preset.
3. Turn the Rotary Knob in either direction to move up
or down through your presets. The new channel will
start to play as soon as you stop turning the Rotary
Knob.
• Only stored presets will be displayed, regardless
of what bank they are stored in.
• Presets will be grouped and displayed by preset
bank and number (ex. A-1, A-2...B-1, B-2...C-1,C-
2...) and rotate all the way around back to the
beginning.
Default Display P.TUNE Display
Sportster SP-R2 User Guide