Starting Sewing; Foot Control; Changing The Needle Stop Position - Singer Fashion Mate Instruction Manual

Starting sewing

Attention: Consult a qualified electrician if in doubt as how to connect the machine to the power
source. Unplug the power cord when the machine is not in use.

Changing the needle stop position

Downloaded from ManualsNet.com search engine

Foot control

With the sewing machine turned off, insert the foot
control plug into its connector on the sewing machine.
Turn on the sewing machine, and then slowly depress
the foot control to start sewing.
Release the foot control to stop the sewing machine.
Normally, the sewing machine is set to leave the
needle in the fabric when sewing is stopped.
Instead, the machine can be set to leave the needle
upward when sewing is stopped.
When the needle stop in the lowest position, you
can press the foot controller down lightly, the
needle point upward, then the sewing will stop
with the needle in the highest position.
Perform the same operation to change the needle
stop position to the lowest position.
4