Page 1
1.800.272.4511 Insidesales@imi-precision.com norgren.com/automationsolutions S e n s o d S t u d N u t a n Durable, Sensitive and Cost-saving...
Contents Nut and Stud Sensors 1.800.272.4511 Insidesales@imi-precision.com norgren.com/automationsolutions NUT SENSOR FAST FIND GUIDE PAGE NS-04 STUD SENSOR FAST FIND GUIDE PAGE SS-23 ADDITIONAL REFERENCES FAST FIND GUIDE PAGE R-32 www.norgren.com/automationsolutions insidesales@imi-precision.com 1-800-272-4511...
Page 3
Note: The use of the IMI Norgren Nut Thread Detector is limited in certain stainless steel and aluminum grades or alloys. We encourage an evaluation be made for stainless steel and aluminum parts prior to purchase. Please contact insidesales@imi-precision.com for more information.
Page 4
SNS AND SNP SERIES NUT THREAD DETECTOR Avoid bad parts Prevent manual inspection save time and money Heavy duty applications Durable NUT THREAD DETECTOR Uses inductive proximity detection technology to verify the presence > of nuts or threads Avoid defective parts from going through >...
NUT SENSOR Guide Fast Find NUT THREAD DETECTOR Nut Sensor SNP: Nut Thread SMR: Nut Sensor SNS: Toughened SMH: Toughened Selection Guide Detector Monitor Nut Thread Nut Sensor Monitor Detector NS-06 NS-07 NS-09 NS-10 NS-19 SCE and SCF: SAB: Spring Additional English to Metric Cables...
Page 6
SNS06/SNS08 SNS06/SNS08 SNS06 M8 nuts SMH36004 SNS08 SMH36005 SMH36006 M10 nuts SMH36008 Right angle Straight SNS10 SMH36010 SCF12160 for SCF12060 for SMH36012 SNS10/SNS12 SNS10/SNS12 M12 nuts SNS12 Spring mount SAB30403 for SNS04/ SNS05/ SNS06/ SNS08 only www.norgren.com/automationsolutions NS-06 insidesales@imi-precision.com 1-800-272-4511...
Page 7
Nut Sensor SNP50608 > Detects M5, M6 or M8 nut or thread presence > Abrasion and impact resistant > For light duty applications with sensor tip radial loads up to 30 lbs. > Exceptional for thread detection and thread quality detection >...
Page 8
Nut Sensor SNP01012 Detects M10 or M12 nut or thread presence > > Abrasion and impact resistant > For light duty applications with sensor tip radial loads up to 35 lbs. > Exceptional for thread detection and thread quality detection >...
Page 9
Nut Sensor Monitor for Nut Sensor SMR3XXXX > LED for on/off status of sensor > Interface directly to programmable controllers Technical data Sensor connector: Operating temperature range: Target material: 2 X 3-pin terminal strips 32°F to 140°F (0°C to +60°C) Ferrous/Non-Ferrous Supply Voltage Range: Response time:...
Page 10
Nut Sensor Toughened Nut Sensor SNS04 Detects M4 nut or thread presence > > For heavy duty applications with sensor tip radial loads up to 32 lbs. > For use in weld applications > Immune to weld fields > Resistant to weld slag...
Page 11
Nut Sensor Toughened Nut Sensor SNS05 > Detects M5 nut or thread presences > For heavy duty applications with sensor tip radial loads up to 38 lbs. > For use in weld applications > Immune to weld fields > Resistant to weld slag Technical data Minimum nut thickness: Sensor connector:...
Page 12
Nut Sensor Toughened Nut Sensor SNS06 > Detects M6 nut or thread presence > For Heavy Duty Applications with sensor tip radial loads up to 50 lbs. > For use in weld applications > Immune to weld fields > Resistant to weld slag >...
Page 13
Nut Sensor Toughened Nut Sensor SNS06-01 > Detect M6 nut or thread presence, with additional locating pin feature > For Heavy Duty Applications with sensor tip radial loads up to 50 lbs. > For use in weld applications > Immune to weld fields >...
Page 14
Nut Sensor Toughened Nut Sensor SNS08 > Detects M8 nut or thread presence > For heavy duty applications with sensor tip radial loads up to 38 lbs. > For use in weld applications > Immune to weld fields > Resistant to weld slag Technical data Minimum nut thickness: Sensor connector:...
Page 15
Nut Sensor Toughened Nut Sensor SNS08-01 > Detect M8 nut or thread presence, with additional locating pin feature > For heavy duty applications with sensor tip radial loads up to 38 lbs. > For use in weld applications > Immune to weld fields >...
Page 16
Nut Sensor Toughened Nut Sensor SNS10 > Detects M10 nut or thread presence > For heavy duty applications with sensor tip radial loads up to 40 lbs. > For use in weld applications > Immune to weld fields > Resistant to weld slag Technical data Minimum nut thickness Sensor connector:...
Page 17
Nut Sensor Toughened Nut Sensor SNS10-01 > Detect M10 nut or thread presence, with additional locating pin feature > For heavy duty applications with sensor tip radial loads up to 40 lbs. > For use in weld applications > Immune to weld fields >...
Page 18
Nut Sensor Toughened Nut Sensor SNS12 > Detects M12 nut or thread presence > For heavy duty applications with sensor tip radial loads up to 60 lbs. > For use in weld applications > Immune to weld fields > Resistant to weld slag Technical data Minimum nut thickness: Sensor connector:...
Page 20
Nut Sensor Sensor cables with 3 PIN PICO connectors SCE13000, SCE13001, SCE13005 Part number SCE13000, SCE13005 Straight cable, 3-pin PICO for SNP50608, SNP01012, SNS04, SNS05, SNS06, SNS08 “L” Technical data “L” Weight: 74 grams Inches 30.9 1.21 Note 1 Part number “L”...
Page 21
Nut Sensor Stud Sensors Stud Thread Detector Selection Guide Part number SCF12060 Straight cable, 4-pin MICRO for SNS10, SNS12 Technical data Weight: Brown Note 1 84 grams White Blue Black Front view Inches female connector 1828.8 72.0 43.4 1.71 Note 1 4-Pin (female), micro Part number Note 1...
Page 22
Nut Sensor Nut Sensor Spring Mount SAB30403 > Mounts to any nut sensor except for SNS10 and SNS12 > Allows sensor probe to retract when nut is out of place > Allows sensor tip to offset up to 5° off centerline of spring mount to locate misaligned holes Technical data Weight:...
Page 23
> weld slag Sensitive- wide sensing area that checks threads on a longer portion > of a stud Cost-saving- prevents scrap, reduces downtime > Proven- extension of existing and proven IMI Norgren Nut Sensor Line > www.norgren.com/automationsolutions SS-23 insidesales@imi-precision.com 1-800-272-4511...
Page 25
Stud Sensors Stud Thread Detector Selection Guide Stud Thread Detector Selection Guide To PLC Applications > Stud and thread sensing > Quality checking (stud size) > Heavy duty/harsh environments > Heavy side loading applications Sensors Accessories Monitors M5 & M6 studs SMH37005 SMH37006 NSS0506...
Page 26
Stud Sensors M5/M6 Stud Sensor NSS0506 > Detects M5 or M6 stud or thread presence > For heavy duty applications > For use in weld applications > Immune to weld fields > Resistant to weld slag Technical data Sensor connector: Operating temperature range: Target material: Diameter:...
Page 27
Stud Sensors M8/M10 Stud Sensor NSS0810 > Detects M8 or M10 stud or thread presence > For heavy duty applications > For use in weld applications > Immune to weld fields > Resistant to weld slag Technical data Sensor connector: Operating temperature range: Target material: Diameter:...
Page 28
Stud Sensors Sensor cables with 3 PIN PICO connectors SCE13000, SCE13001, SCE13005 Part number SCE13000 “L” SCE13005 Technical data “L” Weight: 74 grams Note 1 Inches 30.9 1.21 Note 1 Brown Blue Part number “L” SCE13000 2000.0 mm (78.74") Black SCE13005 5000.0 mm (196.85") Front View...
Page 29
Stud Sensors Monitor for Stud Sensor SMS3XXXX > LED for on/off status > Interface directly to programmable controller Technical data Power/sensor connector: Operating temperature range: Target material: 2 X 3-pin terminal connector 32°F to 140°F (0°C to +60°C) Ferrous Supply voltage range: Response time: Short circuit protection: 10VDC to 30 VDC...
Page 30
Stud Sensors Spring Mount SAB30413 > Mounts to the NSS0506 Stud Sensor > Allows sensor to retract when stud is out of place > Allows sensor offset up to 5° off centerline of spring mount to locate misaligned studs Technical data Maximum Axial Travel: Materials: 0.23"...
Stud Sensors Spring Mount SAB30414 > Mounts to the NSS0810 Stud Sensor > Allows sensor to retract when stud is out of place > Allows sensor offset up to 10° off centerline of spring mount to locate misaligned studs Technical data Maximum Axial Travel: Materials: 0.20"...
The detect problems, but while they could often IMI Norgren Stud Thread Detector helps detect the presence of a stud, they were users eliminate scrap caused by missing or not sensitive enough to detect threads.
Page 33
Use the table below to convert English nuts to metric and determine the compatible nut sensor Metric to ASME Nut/Thread Cross Reference Nut Sensor Tip Diameter Metric Nut Sizes SAE Nut Sizes SNS04 0.12" 8-32, SNP50608 or SNS05 0.16" 12-24, 1/4-20 SNP50608 or SNS06 0.18"...
Page 35
Warning Warranty The use of the IMI Norgren Nut Thread Detector is limited in certain Items sold by Norgren are warranted to be free from defects stainless steel and aluminum grades or alloys. We encourage an in materials and workmanship for a period of two years* from...