Related Manuals for Altman PHX LED Series
Summary of Contents for Altman PHX LED Series
- Page 1 PHX LED SERIES LUMINAIRES INSTALLATION & USER’S MANUAL PHX_LED_USERS_MANUAL_20220512...
- Page 2 Note: Information contained in this document may not be duplicated in full or in part by any person without prior written approval of Altman Lighting Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this...
-
Page 3: Important Information
PHX LED Series Installation & Users Manual Important Information Product Safety Notices When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Do not mount near gas or electric heaters. - Page 4 Altman Lighting, Inc., a subsidiary of Altman Stage Lighting Company, Inc., herein referred to as Altman, warrants each new product (except for spare parts or products Altman does not manufacture) for a period of FIVE (5) years and ONE (1) day from date of shipment to correct by repair or replacement any part defect due to faulty material or workmanship.
-
Page 5: Table Of Contents
About this Manual PHX2 250W and PHX3 / PHX3.5 340W Fixtures 29 Product Descriptions Cleaning And Care Accessories Lens Cleaning PHX LED Series LED Overview Troubleshooting PHX LED Series Luminaires Components Troubleshooting Guide Installation And Setup Technical Specifications Power Requirements... -
Page 6: About This Manual
Installation & Users Manual About this Manual The document provides installation and operation instructions for the following products: • PHX LED Series Luminaires Please read all instructions before installing or using this product. Retain this manual for future reference. Product Descriptions This manual covers the all PHX LED LED Luminaires models. -
Page 7: Accessories
PHX LED Series Installation & Users Manual Accessories Contact your Authorized Altman Lighting Dealer for price and availability of all accessories for PHX LED LED Luminairess. Additional information can be found on the Altman Lighting web site at www.altmanlighting.com. Included Accessories - Fixed Focus Models... - Page 8 PHX LED Series Installation & Users Manual Accessories Available Accessories - Zoomable Focus Pattern Holders Part Number Description PHXZ-PHGSB B Size Steel Pattern Holder (86mm OD/ 64.5mm IA) PHXZ-PHGSB-3T B Size Steel Pattern Holder (86mm OD/ 64.5mm IA) 3 Tab Style PHX-PHISB B Size Steel Pattern Holder (86mm OD/ 64.5mm IA) for Iris Slot...
-
Page 9: Phx Led Series Led Overview
PHX LED Series Installation & Users Manual PHX LED Series LED Luminaires Overview PHX LED Series Luminaires Components Fixed Focus Models Figure 1 shows the basic features of Fixed Models. Safety Cable Attachment Point Shutter Assembly (4 Shutters) Gobo / Pattern Holder Slot... -
Page 10: Installation And Setup
PHX LED Series Installation & Users Manual Installation And Setup Power Requirements WARNING! PHX Series LED Luminaires should be connected to a constant circuit or a relay device. They should never be connected to a dimmer or circuit controlled by a dimmer. Read this section carefully on how to properly connect your fixture. -
Page 11: Connecting Dmx
Connecting DMX The PHX LED Series Luminaires offers two DMX512 connections. One for DMX Input (from a DMX source) and one DMX through- put (out). Basic DMX512 installation consists of connecting multiple DMX controlled PHX LED Series Luminaires together (up to 32 Total devices per DMX string) in “daisy-chain”... -
Page 12: C-Clamp Installation
PHX LED Series Installation & Users Manual C-Clamp Installation The provided c-clamp should be installed as shown in Figure 2. Only use the hardware supplied with the c-clamp. C-Clamp PHX LED Yoke 1/2-inch (13mm) Mounting Hole 1/2-inch Flat Washer 1/2-inch Lock Washer... -
Page 13: Installing Fixture Accessories
NOTE: There are many aftermarket accessories for Altman Lighting products available through third-party suppliers. When considering these aftermarket accessories, we suggest that you consult with your Altman Regional Sales Manager beforehand regarding capability and effects on product performance. -
Page 14: Rotating Shutter Assembly (All Models)
PHX LED Series Installation & Users Manual Rotating Shutter Assembly (All Models) If rotating the shutter assembly is required, loosen, but do not remove, shutter rotation lock knob (see Figure 6) on fixture. Using both hands, rotate the shutter assembly (in either direction) until in the desired position. Hand-tighten shutter rotation lock knob. -
Page 15: Accessory Holder
PHX LED Series Installation & Users Manual Accessory Holder Each PHX Series LED Luminaire is equipped with an end of lens accessory holder to hold the supplied color frame. Please note which model you have. The accessory holder for fixed focus and zoomable models are different and are operated differently... -
Page 16: Drop In Iris Slot (All Models)
PHX LED Series Installation & Users Manual Drop In Iris Slot (All Models) Each PHX LED Luminaire’s lens has a large opening for a drop in iris or motorized pattern device / gobo rotator (by others). This slot has a retractable cover in order to prevent light leak when not in use and should be closed as far as possible when in use. -
Page 17: Yoke Assembly
PHX LED Series Installation & Users Manual Yoke Assembly The PHX LED Luminaire can have its tilt adjusted via the two lock off handles on each side of the luminaire . Simple loosen (but DO NOT REMOVE) each handle so the unit is able to swing up and down. Set tilt as desired and re-tighten the two lock off handles so the unit does not move from the set position. -
Page 18: Menu System
PHX LED Series Installation & Users Manual Menu System All PHX Series LED Luminaires have an onboard menu system that allow users to control a variety of luminaire features or setup the luminaire for standalone operation or control via DMX. This section covers the onboard menu system and DMX mapping for all models. -
Page 19: Setting Dmx Mode
Press MENU to back out of DMX Mode setting. Note: The PHX LED Series is capable of operating in 4 DMX modes or personalities. The Modes menu allows users to select which DMX map the luminaire will operate. For further information on modes of operation and mapping, refer to “DMX Mapping and... -
Page 20: Dmxloss
PHX LED Series Installation & Users Manual DMX Loss To set the fixture’s DMX Loss: (Note: Default is LED Off) Step 1. Power fixture on and wait until the fixture booting is completed. When complete, LCD display will go blank. -
Page 21: Player / Programming Cues
PHX LED Series Installation & Users Manual Player / Programming Cues The Player allows users to pre-program and the playback cues (up to five) on the fixture automatically. The cues can run as short as one (1) second or as long as 99 minutes. You can choose any of the colors available on your fixture as desired within the cues to create any look. -
Page 22: Menu Options And Settings
PHX LED Series Installation & Users Manual Menu Options and Settings Table 5, “Menu Options and Settings,” on page 20 and 21 describes the available menu options and settings. Not all options and settings are available for all models in the PHX series and are noted. - Page 23 PHX LED Series Installation & Users Manual Table 5: Menu Options and Settings Main Menu Main Menu Sub Menu Sub Menu Options Options Description / Notes Description / Notes Facts (Factory) Set? Resets fixture settings to factory defaults. Defaults Sets fan on low speed "Fan...
-
Page 24: Dmx Maps
PHX LED Series Installation & Users Manual DMX Maps This section provides DMX maps for all versions of PHX LED Luminaires. Please refer to the map specific to the fixture you have. Master Channel is selectable as ON or OFF and provides a Master Fade channel that dims all four (4) colors proportionally at the same time in order to maintain the color. -
Page 25: Tunable White Dmx Maps (3000K To 5600K)
PHX LED Series Installation & Users Manual Fixed White DMX Maps (3000K and 5600K) DMX Channel DMX Channel Channel Description Channel Description DMX Range DMX Range Description Description White (High Byte) 0 - 65535 16-bit control of intensity White (Low Byte) -
Page 26: Color Dmx Maps (Rgbw, Rgba, And Rgbl Leds)
PHX LED Series Installation & Users Manual Color DMX Maps (RGBW, RGBA, and RGBL LEDs) Table 15 through Table 18 on page 26 show the DMX map options for color LED fixtures in 8-bit and 16-bit modes with master channel off and on. - Page 27 PHX LED Series Installation & Users Manual Color DMX Maps (RGBW, RGBA, and RGBL LEDs) DMX Channel DMX Channel Channel Description Channel Description DMX Range DMX Range Description Description Red (High Byte) 0 - 65535 16-bit control of Red LEDs...
-
Page 28: Rdm Control And Tables
PHX LED Series Installation & Users Manual RDM Control and Tables PHX Series LED Luminaires are fully RDM compliant. This section outline the RDM features available for all models. Please refer to the table specific for the model you have. -
Page 29: Phx2 250W And Phx3 / Phx3.5 340W Fixtures
PHX LED Series Installation & Users Manual PHX2 250W and PHX3 / PHX3.5 340W Fixtures Category Category Support Parameters Support Parameters ON...01 4F 6E 20 20 20 20 20 20 Smoothing 0xA104 OFF...00 4F 66 66 20 20 20 20 20 OFF...00... -
Page 30: Cleaning And Care
If you have any questions regarding the use or care of your PHX LED Series Luminaire, please contact Altman Lighting technical support or your local Authorized Dealer. If you have any questions regarding the use or care of your PHX LED Series LED Luminaires, please contact Altman Lighting techni- cal support at support@altmanlighting.com... -
Page 31: Lens Cleaning
Step 5. Using a second lint-free lens tissue, wipe off any alcohol residue. Step 6. Once lens is completely dry, reinstall lens assembly. Service and Maintenance If you have any questions regarding the use or care of your PHX LED Series LED Luminaires, please contact Altman Lighting technical support at support@altmanlighting.com or your local Authorized Dealer. -
Page 32: Troubleshooting
Troubleshooting Guide The chart below provides possible causes and remedies for various error messages and/or symptoms. If this chart is unable to address your issue, please contact your authorized dealer or Altman customer service at 1.303.500.7072 or support@altmanlighting.com for assistance. -
Page 33: Technical Specifications
0 to 50 degrees C (32 to 122 degrees F) PHX3 Compliance: Compliance: cETLus Listed and CE Marked Note: Basic model specifications shown. For specific model specifications, features, sizes/weights, and accessories, refer to the product specification sheet or visit the Altman Lighting web site at www.altmanlighting.com. Page 33...
Need help?
Do you have a question about the PHX LED Series and is the answer not in the manual?
Questions and answers