Related Manuals for Cole Parmer CN-200 Series
Summary of Contents for Cole Parmer CN-200 Series
- Page 1 Cole-Parmer ® CN-200 Series Analogue Controllers Instruction Manual M7759 Version 3.5...
-
Page 2: Table Of Contents
Please take your time to read this Instruction manual in order to understand the safe and correct use of your new Cole-Parmer product. It is recommended the responsible Body for the use of this equipment reads this instruction manual and ensures the user(s) are suitably trained in its operation. Contents Page Section 1... -
Page 3: Introduction
INTRODUCTION 1.1. CN-200-2300 is a 230 V ~ AC controller. The CN-200-1100-115 is a 115 V ~ AC controller. 1.2. This series of Power Controllers have been designed to regulate the power input to laboratory heating equipment. These controllers can be mounted on a standard ½” (12mm) dia scaffold or retort stand or they can also be wall mounted using a mounting bracket or stand directly on the bench. -
Page 4: Symbols And Using This Instruction Manual
SYMBOLS AND USING THIS INSTRUCTION MANUAL 2.1. Throughout this Instruction manual the following symbols are shown to identify conditions which pose a hazard to the user, or to identify actions that should be observed. These symbols are also shown on the product, or its packaging. When a symbol is shown next to a paragraph or statement it is recommended the user takes particular note of that instruction in order to prevent damage to the equipment or to SYMBOLS AND USING THIS INSTRUCTION BOOK. -
Page 5: Safety Information
3. SAFETY INFORMATION. This product has been designed for safe operation when used as detailed in SAFETY INFORMATION accordance with the manufacturer’s instructions. 3. SAFETY INFORMATION. This product has been designed for safe operation when used as detailed in accordance NOTE: Failure to use this equipment in accordance with this instruction book may with the manufacturer’s instructions. - Page 6 implosion or the release of toxic or flammable gases) that might legislative health & safety procedures and all associated legislation personnel should attempt to repair this Controller. rating). 3.2. General Safe Operating Practice. arise have been suitably addressed before proceeding. When Never Operate this equipment with out connection to earth / applicable to your areas of operation.
-
Page 7: Unpacking And Contents
UNPACKING AND CONTENTS 4. UNPACKING AND CONTENTS. 4.1. Please check the contents of your carton against the diagram. (Please note CN-200-2300 & CN-200-1100-115 has a hard wired input). 4.1. Please check the contents of your carton against the diagram. (Please note CN-200-2300 & CN-200-1100-115 has a hard wired input). Item Contents. -
Page 8: Installation
INSTALLATION 5. INSTALLATION. 5.1. Electrical safety and Installation 5.1. Electrical safety and Installation. 5.2. This equipment is designed for safe operation under the following conditions:- 5.2. This equipment is designed for safe operation under the following conditions:- • Indoor use. Indoor use. -
Page 9: Environmental Protection
6. ENVIRONMENTAL PROTECTION. 6. ENVIRONMENTAL PROTECTION. ENVIRONMENTAL PROTECTION 6. ENVIRONMENTAL PROTECTION. 6.1. Maximum consideration to environmental issues within the design and 6.1. Maximum consideration to environmental issues within the design and 6.1. Maximum consideration has be given to environmental issues within the design and manufacturing process without compromising end product performance and value. -
Page 10: Equipment Operation
EQUIPMENT OPERATION 7. PRODUCT OPERATION. 7.1. The illustrations below show a detailed layout of the CN-200-2300 & CN-200-1100-115 control unit. 7.1. The illustrations below show detailed layout of the MC227 & MC228X1 control unit. 7. PRODUCT OPERATION. 7.1. The illustrations below show detailed layout of the MC227 & MC228X1 control unit. 230V illustration Mains Input socket. - Page 11 Replace fuses only with the type as listed in section, Parts and Accessories and Technical Specifications. (See fuse type and rating). The CN-200-2300 & CN-200-1100-115 controllers can be used with the following Ensure the Mains Power Supply conforms to rating found on the Cole-Parmer products: data plate located on the base of this product.
-
Page 12: Technical Specification
8. TECHNICAL SPECIFICATION. TECHNICAL SPECIFICATION Mains supply voltage CN-200-2300 - 230V AC 50/60 Hz 8.1. Specifications. Mains supply voltage CN-200-1100-115 - 115V AC 50/60 Hz Mains supply voltage 230V~AC 50/60 Hz Maximum coupled power 2300 Watts Mains supply voltage MC227 & 115V~AC 50/60 Hz consumption 230V MC228x1... -
Page 13: Maintenance
9. MAINTENANCE 9. MAINTENANCE 9.1. General Information. MAINTENANCE 9.1. General Information. 9.1. General Information. Unplug the unit from the mains voltage supply and allow it to cool Unplug the unit from the mains voltage supply before undertaking any before undertaking any maintenance tasks. maintenance tasks. - Page 14 • Press o display the value and then use to make the read value coincide with the value measured by the reference instrument. 9.3. Spillage and Decontamination. • Exit from calibration by pressing button In the event of spillage switch off and unplug this product from the mains electrical 9.5.
-
Page 15: Spares And Accessories
SPARES AND ACCESSORIES Order Number Description CRM5608 Neon amber (230V) CRM5620 Neon amber (115V) AZ9127 Energy regulator (230V) AZ9128 Energy regulator (115V) AZ6704 Mounting bracket kit HH179(S) Mains cord and moulded IEC plug and lead set cable (UK) 10A BS1362 HH180(S) Mains cord and moulded IEC plug and lead set cable (Europe) -
Page 16: Customer And Technical Support
CUSTOMER AND TECHNICAL SUPPORT For help and support in using this product, please contact Customer Services at the following address: Antylia Scientific Ltd. Beacon Road, Stone, Staffordshire, ST15 0SA, United Kingdom Tel: +44 (0)1785 812121 Service: cpservice@antylia.com General enquiries: cpinfo@antylia.com Order enquiries: cpsales@antylia.com Technical support: cptechsupport@antylia.com www.coleparmer.com... -
Page 17: Notes
NOTES... - Page 18 NOTES...
-
Page 19: Eu Declaration Of Conformity
This product meets the applicable CE Directives that interference will not occur in practise. Where and UKCA Legislation for radio frequency there is a possibility that injury, damage or loss might interference and may be expected not to occur if equipment malfunctions due to radio interfere with, or be affected by, other equipment with similar frequency interference, or for general advise before qualifications. - Page 20 Ordering Information Order No. Series Model Legacy SKU 36223-00 CN-200 CN-200-2300 MC227 36223-01 CN-200 CN-200-1100-115 MC228X1 India Warranty Registration T: +44 (0) 1480 272279 T: +9122 61394444 E: uk.sales@antylia.com E: info@coleparmer.in W: coleparmer.co.uk W: coleparmer.in Germany China T: +49 (0) 9377 92030 T: +1 847 549 7600 E: de.sales@antylia.com E: sales@antylia.com...
Need help?
Do you have a question about the CN-200 Series and is the answer not in the manual?
Questions and answers