Chain Lubricant - Shindaiwa 326T Owner's/Operator's Manual

Fuel Mix Chart
Fuel to Oil Mix-50:1 Ratio
U.S.
GAS OIL GAS
Gallons Fl.oz. Liter
1 2.6
2 5.2
5 13 20
TANK INDICATION
FUEL TANK OIL TANK
Fuel and lubricant, continued
Mixing Instructions
1. Fill an approved fuel container with half of the required amount of
gasoline.
2. Add the proper amount of 2-stroke oil to gasoline.
METRIC
3. Close container and shake to mix oil with gasoline.
OIL
4. Add remaining gasoline, close fuel container, and remix.
cc.
4 80
8 160
IMPORTANT
400
Spilled fuel is a leading cause of hydrocarbon emissions. Some
states may require the use of automatic fuel shut-off containers to
reduce fuel spillage.
After use
DO NOT store a unit with fuel in its tank. Leaks can occur. Return
unused fuel to an approved fuel storage container.
Storage: Fuel storage laws vary by locality. Contact your local gov-
ernment for the laws affecting your area. As a precaution, store fuel in
an approved, airtight container. Store in a well-ventilated, unoccupied
building, away from sparks and flames.
IMPORTANT
Stored fuel ages. Do not mix more fuel than you expect to use in
thirty (30) days, ninety (90) days when a fuel stabilizer is added.
IMPORTANT
Stored two-stroke fuel may separate. ALWAYS shake fuel container
thoroughly before each use.

CHAIN LUBRICANT

Proper lubrication of the chain while in operation reduces friction
between the chain and the guide bar to a minimum and assures a lon-
ger service life.
■
Use bar and chain oil of high quality for this purpose.
■
Do not use used or reclaimed oil to avoid various oiler problems.
■
Use Shindaiwa bar and chain oil.
■
When Shindaiwa bar and chain oil is not available, use motor oil,
etc.
■
Use bar and chain oil of the following grades:
SAE NO. 30 ... in summer
SAE NO. 10 ... in winter or when cutting resinous trees.
■
When refueling, also refill chain oil.
13