Introduction Congratulations on your purchase of the Triplett IRT150 Stem Thermometer with built in IR (Infrared) Thermometer. This instrument combines a non- contact infrared thermometer with stem type temperature probe, it can measure the surface and inside temperature of object, it is a professional...
LCD DISPLAY 1. IR Temperature Measurement Indicator 2. IR HOLD Icon 3. Temperature Units of Measure (°F/°C) 4. Temperature Measurement 5. Low Battery Indicator 6. Probe Temperature Measurement Indicator 7. HI/LOW ALARM Indicator Operation Basic Measurements Power ON/OFF IR Measurements ...
Page 4
Probe Measurements Swing the stem probe to the OUT position of the housing. The meter will automatically turn ON and the LCD will display the probe temperature. While measuring, the probe measure icon will appear in the down of the LCD ...
Page 5
Press the “Flashlight/DOWN” button reduce the high alarm value. Press the SET button four times to set low alarm ON/OFF. Press the “SCAN/ Measure Button” or the “Flashlight Button to disable the ON/OFF Low Alarm. Battery Replacement When the battery icon appears on the LCD, the batteries must be replaced.
Maintenance Please clean the housing with soft cloth, do not let any liquid in to infrared sensor region. Please clean the probe before/after using the probe, or disinfect it with water or cleaner. Specifications General Specifications Data Hold Freezes displayed reading Measurement Response <500ms IR Distance to Spot ratio...
Triplett / Jewell Instruments extends the following warranty to the original purchaser of these goods for use. Triplett warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of (1) one year from the date of purchase.
Need help?
Do you have a question about the IRT150 and is the answer not in the manual?
Questions and answers