Tarmo 310175 Manual page 4

Wet/dry vacuum cleaner, 10 l
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
Switch off
Switch on
Inlet
Vacuum cleaner x 1
Flexible hose x 1
Brush head x 1
Operating instructions x 1
Extension tube x 3
Brush assembly x 1
Vacuum cleaner bag x 1
Sponge filter x 1
Assembly
Vacuum cleaner bag: Remove the dust container. Put the vacuum cleaner bag in
the dust container carefully. The dust bag is suitable for collecting small waste
material and dust. The bag is for dry materials only. Attach the dust container to
the vacuum cleaner.
Flexible hose (optional): To use the flexible hose, insert the end of the hose into
the inlet. Make sure that it is snapped into place.
Accessories: Choose your desired accessory (nozzle and tube) and attach it to
the end of the hose.
310175_imuri_ko_en-fi-sv-et-lv-lt-ru.indd 4
310175_imuri_ko_en-fi-sv-et-lv-lt-ru.indd 4
Operation
Vacuuming up dust
Handle
Before you start the appliance, make sure that the vacuum cleaner bag and
hose assembly are in place. Unwind the power cord. Plug in the appliance and
switch it on. Unplug the appliance after use.
Cover
Vacuuming up liquids
Hook
Check whether the dust filter has been removed. Make sure that the hose is in
position and that the inside of the tank is clean and free from dust. Empty and
clean the tank after each use.
Blower Function
Dust container
Install the hose into the blowing output in order to use the blower function.
Cleaning and Maintenance
Before cleaning the equipment, unplug the power plug. Keep the ventilation
Wheel
slots of the machine clean to prevent the engine from overheating. Regularly
clean the machine housing with a soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt. If the dirt does not come off, use a soft
cloth moistened with soapy water.
Cleaning the Machine
• Empty and clean the machine after each use.
• Switch off and unplug the machine.
• Open the dust container.
• Remove the dust bag and empty the tank.
• Dry the tank carefully after the machine has been used for vacuuming up
liquids.
• Reassemble the vacuum cleaner.
EN
16.3.2021 8.41.27
16.3.2021 8.41.27

Advertisement

Table of Contents
loading

Table of Contents