Part Names Of Main Unit; Listening With Headphones - Sharp Aquos LC-20B6U Operation Manual

Part Names of Main Unit

Controls
Upper control panel
VOL (Volume)
(–)/(+)
CH (Channel)
( )/( )
Speaker
OPC (Optical Picture Control) sensor
Remote sensor
A
• INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
■ Plug the headphone mini-plug into the HEADPHONE jack located on the front of the main unit.
A
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack.
MAIN POWER
MENU
INPUT
OPC indicator (Optical Picture Control)
The OPC indicator lights up green when the "OPC" is set to "ON".
(See page 22.)
POWER/WAKE UP TIMER indicator
POWER indicator lights up green when the power is on, and red
when in the standby mode (the indicator will not light when the
main power is off), and orange when the wake-up timer is set (the
indicator will light when in the standby mode).

Listening with Headphones

Headphones
How to adjust the angle
ilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
To change the vertical angle of the LCD TV
set, tilt the screen up to 5 degrees forward or
10 degrees backward. The LCD TV set can
also be rotated up to 25 degrees to right and
left. Please adjust the angle so that the LCD
TV set can be watched most comfortably.
Speaker
HEADPHONE jack
Plug the headphone mini-plug into the Headphone
jack located on the front of the main unit.
▼ On-screen display
VOLUME
20
Adjust the sound volume
+ –
using VOL ( ) / (
remote control.
) on the
11