Sharp LC-13B2UA Operation Manual page 27

ADJUSTMENT (Continued)
SET UP (Continued)
I Saving broadcast TV channels in the memory
POWER
DISPLAY
SLEEP BRIGHT
MENU
MUTE TV/VIDEO
FLASHBACK
VOL CH
1 2 3
4 5 6
7 8 9
0
100
MTS
I Adding weak or additional channels or erasing unwanted channels from TV memory
POWER
DISPLAY
SLEEP BRIGHT
MENU
MUTE TV/VIDEO
FLASHBACK
VOL CH
1 2 3
4 5 6
7 8 9
0
100
MTS
Note:
I If CH SEARCH is performed again, the previously memorized channels will be lost.
26
1
Press MENU to display the MENU
screen, press ]/[ to move the
cursor to SET UP, and press </ >
to enter.
2
Press ]/[ to move the cursor to
CH-SETTING, and press </ > to
enter.
3
Press ]/[ to move the cursor to
MENU/
CH SEARCH, and press </ > to
]/[/
enter.
</ >
4
Press >. The tuner will search
through all available channels in
your area and add them to the
TV's memory.
Note:
To interrupt CH SEARCH, press <. CH
I
SEARCH will stop at the current
channel and will not add any higher
channels.
5
Press MENU to exit.
1
Press MENU to display the MENU
screen, press ]/[ to move the
cursor to SET UP, and press </ >
to enter.
2
Press ]/[ to move the cursor to
CH-SETTING, and press </ > to
enter.
3
Press ]/[ to move the cursor to
CH MEMORY, and press </ > to
MENU/
enter.
]/[/
4
Use ]/[ or Channel Select to
</ >
select each desired channel to add
or erase.
Channel
5
Press > to add the channel to the
Select
TV's memory or press < to erase
the channel from the TV's memory.
6
Press MENU to exit.
CH–SETT I NG
RETURN
A I R/ CABLE
CH SEARCH
CH MEMORY
CH SEARCH
A I R 2
START : EX I T :
CH–SETT I NG
RETURN
A I R/ CABLE
CH SEARCH
CH MEMORY
CH MEMORY
A I R 2
TO ADD : EX I T :
> <
to add channel 2 to erase channel 2
to the TV memory
to the TV memory
CH MEMORY
A I R 2
TO ERASE : EX I T :
MENU
MENU
MENU