Antenna Connection; Preparation - Sharp LC 10A2U Operation Manual

PREPARATION (Continued)
Antenna Connections
Antennas
I The antenna requirements for good color television reception are more important than those for black & white
television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna
systems:
1. A 75 ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300 ohm system is a flat "twin-lead" cable that can be
attached to a 75 ohm terminal through a 300-75 ohm
ADAPTOR (not supplied).
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set.
A. Combination VHF/UHF Antennas
300/75-ohm
ADAPTOR
VHF/UHF ANTENNA
(Not supplied)
or
75-ohm
coaxial cable
B. Separate VHF/UHF Antenna
VHF UHF
ANTENNA ANTENNA
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
or
cable
10
VHF/UHF ANTENNA
300-ohm
twin-lead
Supplied antenna cable
COMBINER
(not supplied)
IN OUT
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
To antenna input
terminal