To Set Up The Sf Unit To Receive Data - Casio SF-4990 User Manual

PART 6 Data Communications

To set up the SF Unit to receive data

1. While an initial screen is displayed, press
the function menu.
•
If you want the received data to be stored in the secret memory area, you
should also enter the secret memory area at this point. If you are in the open
memory area on the receiving unit, received data is stored into the open
memory area.
2. Press the applicable number key to select DATA COMM.
3. Press to select RECEIVE.
2
•
This message indicates that the receive unit is standing by for data. Perform
the required procedures to start sending data from another SF Unit, or a
personal computer (see the Interface Unit manual for details).
•
To abort the receive operation at any time, press
•
This procedure is the same regardless of whether the data is received from
another SF Unit, or from a personal computer.
4. The display changes to the following once the SF Unit starts receiving data.
82
E
RECEIVE OK
TO STOP PRESS ESC
RECEIVING
ITEM NO
TO STOP PRESS ESC
once or twice to display
FUNCTION
.
ESC
Receive data
16
item count