saro ES 903 PZ 2/2 Operating Instructions Manual page 9

Pizza preparation table
Table of Contents

Advertisement

AUSPACKEN
Vergewissern Sie sich, dass die Verpackung unbeschädigt
ist. Das Gerät, als auch die Zubehörteile sind für den
Transport geschützt und / oder fixiert. Nach dem Öffnen
der Verpackung entfernen Sie das Verpackungsmaterial
und etwaige Transportsicherungen, in Form von
Klebebändern oder Kabelbindern.
Oft wird Edelstahl durch eine Kunststoff-Folie für
Produktion und Transport wirksam geschützt. Diese vor
Gebrauch des Artikels bitte abziehen, von oben nach
unten und so bald wie möglich. Vor allem durch
Sonneneinstrahlung lassen sich die Folien auf Dauer nur
noch mühsam abziehen. Folien- oder Klebereste
könnten anschließend auf der Oberfläche verbleiben.
Diese sind zwingend zum Schutz der Passivschicht und
zum Korrosionsschutz
des Edelstahls rückstandslos zu entfernen.
Überprüfen sie dann die Vollständigkeit der Lieferung
und vergewissern Sie sich, dass weder das Gerät noch
das Zubehör, Beschädigungen aufweist.
Bewahren Sie die Verpackung des Gerätes auf. Nur in der
Originalverpackung kann das Gerät sicher transportiert
werden. Falls eine Aufbewahrung der Verpackung nicht
möglich
ist,
trennen
Verpackungsmaterialien und liefern Sie diese bei der
nächstgelegenen
Sammelstelle
Entsorgung ab.
Obwohl das Gerät von innen gereinigt wurde, bevor es
versendet wurde, ist es ratsam, den Innenraum noch
einmal zu reinigen, bevor Sie diesen mit Ware füllen.
AUFSTELLEN DES PIZZATISCHES
Stellen Sie das Gerät in einem trockenen und ausreichend
belüfteten Raum auf. Sorgen Sie dabei für einen sicheren
Stand auf einem trockenen und rutschfesten Untergrund.
Überzeugen Sie sich, dass der vorgesehene Aufstellungsplatz
genügend Raum für einen ordnungsgemäßen Gebrauch und
Wartung bietet.
Stellen Sie das Gerät mindestens 20 cm von allen Seiten von
den Wänden entfernt auf, um jederzeit für genügend
Luftzirkulation zu sorgen.
Die Leistung und der Stromverbrauch können durch die
Umgebungstemperatur
oder
beeinträchtigt werden. Setzen Sie das Gerät daher nicht
direkter Sonneneinstrahlung aus und platzieren Sie es nicht in
unmittelbarer Nähe eines Herdes, eines Heizkörpers oder
einer sonstigen Wärmequelle.
Sorgen Sie dafür, dass der Netzstecker immer frei zugänglich
ist und ohne Umstände vom Stromnetz getrennt werden
kann.
IR 01-2022
UNPACK
Sie
die
verschiedenen
zur
sachgemäßen
direktes
Sonnenlicht
Make sure that the packaging is undamaged. The device as well
as the accessories are protected and / or fixed for transport.
After opening the packaging, remove the packaging material
and any transport securing devices in the form of adhesive
tapes or cable ties.
Stainless steel is often effectively protected by a plastic film for
production and transport. Please remove these before using
the article, from top to bottom and as soon as possible. In the
long run, the films can only be removed with great difficulty,
especially when exposed to sunlight. Foil or adhesive residues
could then remain on the surface. These must be removed
without residue to protect the passive layer and to protect the
stainless steel against corrosion.
Then check the completeness of the delivery and make sure
that neither the device nor the accessories are damaged.
Keep the packaging of the device. The device can only be safely
transported in its original packaging. If it is not possible to store
the packaging, separate the various packaging materials and
deliver them to the nearest collection point for proper
disposal.
Although the devise was cleaned inside before it was shipped,
it is advisable to clean it again before you fill it with goods.
PIZZA PREPARATION TABLE INSTALLING
Place the unit in a dry and adequately ventilated room. Ensure a
safe stand on a dry and non-slip surface.
Make sure that the intended installation site offers sufficient
space for proper use and maintenance.
Place the back of the unit at least 20 cm from the walls from all
sides to ensure sufficient air circulation at all times.
Performance and power consumption may be affected by
ambient temperature or direct sunlight. Therefore, do not place
the device to direct sunlight and do not place it in the immediate
vicinity of a stove, radiator or other heat source.
Make sure that the mains plug is always freely accessible and can
be easily disconnected from the mains.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

465-1075

Table of Contents