User Maintenance; Cabinet - Sharp AL-1340 Operation Manual

DRUM CARTRIDGE REPLACEMENT
Remove the new drum cartridge from the protective bag and remove the protective
4
cover from the cartridge. Then gently install the new drum cartridge.
Gently install the TD cartridge. To install the TD cartridge, see page 11, INSTALLING
5
THE TD CARTRIDGE.
Close the front cover and then the side cover by pressing the round projections near
6
the side cover open button. The drum replacement required (
and the ready (
5

USER MAINTENANCE

Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to
regularly clean the copier.

Cabinet

Wipe the cabinet with a soft, clean cloth.
28
Do not touch the surface of the drum (green portion) of the cartridge. Doing so
may cause smudges on the copies.
) indicator will light up.
When closing the covers, be sure to close the front cover securely and then
close the side cover. If the covers are closed in the wrong order, the covers
may be damaged.
Before cleaning, be sure to turn the power switch off and remove the power
cord from the outlet.
Do not use thinner, benzene or other volatile cleaning agents. Doing so may
cause deformation, discoloration, deterioration or malfunction.
) indicator will go out