Cleaning And Maintenance; Cleaning The Epilator And Attachments - Philips SatinPerfect HP6583 Manual

ENGLISH
16
2
1
3 Insert the new button batteries with the negative side pointing
forward into the battery and light compartment.
Note: The Smart Tweezers work on three alkaline button batteries,
type L736H or AG3 (dia. 7.8 x 3.4 mm).
4 Screw the bottom back onto the battery and light compartment by
turning it clockwise with a coin.

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the adapter dry. Never rinse it under the tap or immerse it in
water. If necessary, clean the adapter with the cleaning brush or a dry cloth.
Clean the epilating head after each wet use to ensure optimum
performance. Always switch off the appliance before you clean it.
1 Switch off the appliance.
2 Remove the cap from the epilating head.
3 Press the release button (1) and remove the epilating head from the
appliance (2).
Note: Never try to detach the epilating discs from the epilating head.
4 Remove loose hairs with the cleaning brush.
5 Rinse all parts (epilator, epilating head, caps and skin stretcher)
under a lukewarm tap while turning them.