Playback From Usb - Philips PET1030 Manual

Stop
6 At the end of the playback, press 9 / to eject the disc from the
player.

5.8 Playback from USB

This USB port supports the playback of JPEG / MP3 / WMA /
DivX / MPG-4 files.
Transfering and recording of data from the DVD to the USB
port is not possible.
1 Briefly press POWER on the main control of the player to
switch on the set.
2 Insert a USB flash drive or USB memory card reader into the
USB port.
The USB plug-in storage only support Mass Storage (MSC)
device. It does not support support Hard Disk USB storage
device and storage in MTP (Music Transfer Protocol) format.
3 The player will browse and show the contents in the USB flash
device automatically.
The DVD player will take some time to browse the content of
your USB flash drive.The browsing time will vary for memory
capacity and the number of content in your USB drive.
4 Use navigation keys to select the file you want to access, then
press OK to play it.
Briefly press 9 on the right side of the player to
stop playback