Table of Contents
Advertisement
Please note :
• Most instructions in this manual refer to Remote Control use
• This unit will automatically turn On the Screen Saver after 5 minutes of inactivity and into the Standby mode after 25
minutes of inactivity
Playback
Before:
Turn On the TV, Amplifier and any other Device(s) which are
connected to this unit Make sure the TV and Audio Receiver
(not supplied) are set to the correct Channel/Input
(
on page 12
1
Press [ y ] to turn on this unit
2 Press [ A ] and insert a disc with label
facing up
3 Press [ B ] to start playback
4 Press [ C ] to stop playback
Disc Menu
Some discs contain menus which allow you to customize DVD
playback Use [K / L / 0 / 1] to select an item, then press [OK],
[ B ] (on the unit)
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the Disc menu
• Press [TOP MENU] to call up the Title menu
Note(s):
• Menu operations may vary depending on the disc
Refer to the manual accompanying the disc for more details
Resume Playback
Press [ C ] during Playback PRE STOP icon
will appear at the top-left on the TV screen
Press [ B ] RESUME icon will appear at the
top-left on the TV screen and Playback will
Resume from the Point where Playback was
Stopped
Note(s):
• To Cancel Resume, press [ C ] one more time in the Stop
mode
• The Resume Playback information stays in unit Memory
even when the Power is turned Off, as long as the Disc
stays in the unit
Pause and Step-by-Step Playback
Press [ F ] during playback
To continue Playback, press [ B ]
The disc goes forward by one Frame each time [ F ] (on the
remote control) is pressed in the Pause mode
To continue Playback, press [ B ]
EN
DVD FUNCTIONS
)
2
2
1
3
4
PRE STOP
Note(s):
• When you Play back a DVD or CD-R/-RW with JPEG Files,
refer to details on page 12
• "
This operation is not available" may appear at the Top-
left on the TV Screen when the operation is prohibited by
the disc or this unit
• Some DVD may Start Playback from title 2 or 3 due to
specific programs
• During the Playback of a 2-layered disc, pictures may Stop
for a moment This happens while the 1st layer is being
switched to the 2nd layer This is Not a Malfunction
• You can change the On-screen language in "Menu"
setting (Refer to page 18)
Fast Forward / Reverse Search
Use [ g ] or [ h ] Repeatedly during
Playback to select the required Forward or
Reverse Speed
To continue Playback, press [ B ]
Note(s):
• Fast Forward or Reverse Search speed is different depending
on the disc Approximate speed is ×2, ×4, ×8 and ×20
Slow Forward Search
Press [ g ] Repeatedly in the Pause mode
to select the required Forward speed
To continue Playback, press [ B ]
Note(s):
• Slow Forward speed is different depending on the disc
Approximate speed is ×1/2, ×1/4 and ×1/8
Zoom
1) Press [ZOOM] Repeatedly during
Playback
to select the required Zoom factor:
×15, ×2 or ×25
2) Use [K / L / 0 / 1] to Slide the Zoomed Picture across the
TV Screen
3) To Exit the Zoom function, press [ZOOM] Repeatedly to
select "ZOOM 1"(Off)
Note(s):
• Zooming function does not work while the Disc Menu is
displayed
• Some Part of the Picture may not be Zoomed depending
on the Disc or Playback status
– 11 –
Lights up when power is On
2
1
X2
SF 1/2
ZOOM 2
Advertisement
Table of Contents
