Shark LIGHT & EASY S3250CW Owner's Manual page 8

Using Your Light & Easy™ Steam Mop - cont'd
1
Clean under furniture and tight
areas using the Shark Backsaver™
®
locking handle. Press the handle
release button and apply slight
pressure to bend the handle. The
Shark ® Backsaver™ joint will lock at
a perfect, access-maximizing angle.
(fig. 1)
2 Press the release button on the
handle again to straighten.
8 TOLL FREE: 1-800-418-0934
S3250CW_11_IB_ENG_100913.indd 8-9
fig. 1
Care of Your Light & Easy™ Steam Mop
fig. 1
fig.2
AFTER USE AND STORAGE
1 When you have finished using the
Light & Easy™ Steam Mop, unplug
the cord from the outlet and place
the mop into the upright position
(fig. 1) and let the unit cool 2-3
minutes. Release steam by pumping
the handle several times.
2 Carefully separate micro-fiber
cleaning pad from steam mop,
avoiding contact with the hot pocket
or dirt. (fig. 2)
3 Empty the water tank before storage.
Remove the water tank cap and
empty the tank over a sink. Replace
the water cap.
English
fig.3
4 To store the cooled Shark Light &
®
Easy™ Steam Mop, hang on a large
hook. (fig. 3)
NOTE: If you want to store the
Light & Easy™ Steam Mop standing
upright, make sure it is leaning
against a wall for added support and
safety. Always store your Shark ®
Light & Easy™ Steam Mop with the
micro-fiber cleaning pad removed.
Store away from children and high
traffic areas.
www.sharkclean.com
10-09-13 10:57 AM
9