Server Module Board Connectors - Dell PowerEdge 1855 Installation And Troubleshooting Manual
Hide thumbs
Also See for PowerEdge 1855:
- Configuration manual (296 pages) ,
- User manual (33 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Table A-1. Server-Module DIP Switch Settings
DIP Switch
Setting
Description
PASSWD
The password feature is enabled when switch 1 is set to "on."
(Switch 1)
(default)
The password feature is disabled when switch 1 is set to "off."
NVRAM_CLR
The configuration settings in NVRAM are retained at system boot when switch 2 is set to "off."
(Switch 2)
(default)
The configuration settings in NVRAM are cleared at next system boot when switch 2 is set to "on."
"on"
"off"
Server Module Board Connectors
See
Figure A-3
and
Table A-2
for the location and description of server module board connectors.
Figure A-3. Server Module Board Connectors
Advertisement
Table of Contents
Troubleshooting
