Table of Contents
Advertisement
3.1 Preparation
● Select an appropriate installation method as needed.
● Install the device on solid and flat surface.
● Leave about 4 inches for heat dissipation space around the switch to ensure good
ventilation.
3.2 Desktop Mount
The device supports desktop mount. You can directly place it on solid and flat desktop.
3.3 Wall Mount
Step 1
Drill two M4 screws into the wall, leaving 1/6 inch (4 mm) of space between the wall and the head
of the screw.
● Screws do not come with the package. Purchase them as needed.
● Make sure that the distance between the screws is the distance
between the wall-mount holes (1.1 inch/ 28.4 mm).
Step 2
Align the wall-mount holes on the back cover of the device with the screws and hang the
device on the screws.
3 Installation
Figure 3-1 Wall mount
4
Advertisement
Table of Contents
