Advertisement
Power switch. To power the amplifier ON or OFF.
Serial No.
RESET
AC INPUT
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
GROUNDING OF THE CENTER PIN OF THE PLUG MUST BE
MAINTAINED.
XXXX
XXXX
1.When using the amplifier, you should check whether the selected voltage is correct. If the voltage is wrong it could
damage the amplifier. Please ensure that the device is connected to a power supply with a ground connection.
2. The CH1 and CH2 input connectors are for direct connection from a mixer. The link connection allows the input
signals to be daisy-chained to other amplifiers.
4. When an amplifier is overloaded, the button of the circuit breaker will immediately become unsprung and will power
off automatically to protect the amplifier. You must consider the reason for this overload condition and make suitable
adjustments to the system. After that, press the button of the circuit breaker and the amplifier can resume its normal
operation.
5. STEREO mode makes the two channels work independently. CH1 input signal goes to CH1 output and CH2 signal
goes to CH2 output. BRIDGE mode makes CH1 input signal go to the BRIDGE output socket. This is controlled by
using the CH1 volume control. PARALLEL mode makes CH1 input signal go to both CH1 and CH2 output sockets.
The input socket of CH2 has no effect. The channel volumes can be adjusted independently.
6. Sensitivity mode : This adjusts the input sensitivity.
All manuals and user guides at all-guides.com
P O W E R
AMP L I F I E R
CH 2
(CH1)
CH 1
POS
NEG
NEG
POS
POS
NEG
OUTPUT
LOCK
LOCK
CH 2
CH 1
BRIDGE
XRSERIES
INPUT
CH 1
SENSITIVITY
0.775V/1.4V
INPUT
CH2
MODE
BRIDGE
PARALLEL
STEREO
Advertisement
