Pyle PWPSB1102 User Manual page 4

6. Complete the installation, the PWPSB1102 will be under the cage bar as shown in the figure.
7. The installation steps of the aluminum ring below are the same as above, after complete
installation, the PWPSB1102 will be above the cage bar as shown in the figure.
BT Pairing & Connection
*Power
1. Press and hold for 3 seconds for power on and off, when the powered ON, the background
led will be white.
*BT Pairing
1. Turn on the BT, and search for "PyleUSA" to be paired. While waiting for being connected, the
BT indicator light will be flashing as blue. No password needed.
2. When BT is connected, the BT indicator led will be blue constantly.
*AUX-IN
1. Short press the SRC button for switching to Aux-In mode, the indicator led will turn green.
4
www.PyleUSA.com