Page 2
www.intertec.info Table of contents 1 General .................................. 3 2 Use ................................... 3 3 Special conditions for safe use.......................... 3 4 Explanation of symbols for warnings and signal words .................. 3 5 Technical Data ................................ 4 6 Installation................................ 4 7 Connection................................ 4 8 Commissioning...............................
Page 3
The safety information warns the user about risks and The type TS is installed in the connection line of the radi- provide information on how risks can be avoided. ator at the factory (standard version).
Page 4
Operating Instructions Thermostat TS/TSE Switch point NOTICE NOTE It is essential to pay attention to this safety advice as you may otherwise incur material damage. INFO Switch on/ switch off temperatur Important notes and useful additional information. Illustration 1: Example: Label thermostat TS10...
Page 5
Illustration 2: CP ..THERM with TS The connection line of the temperature switch must be connected in a housing that complies with the require-...
Page 6
Operating Instructions Thermostat TS/TSE The design of the device does not require any mainten- CAUTION ance. Functional and safety test intervals can be freely selec- Risk of burns from a hot surface ted by the operator in accordance with the applicable Attainable highest temperatures: regulations.
Page 7
Operating Instructions Thermostat TS/TSE The local community authorities or specialist waste dis- Phone: +49 9445 9532-0 posal companies can provide information on environ- e-mail: info@intertec.info mentally friendly disposal. Website: www.intertec.info Warranty Certificate of Conformity The legally defined warranties and warranty periods of...
Need help?
Do you have a question about the TS and is the answer not in the manual?
Questions and answers