Configurations Of Terminals - Sanyo PLV-HD100 Owner's Manual

DVI-I TERMINAL (DIGITAL/ANALOG)
This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to
this terminal with DVI cable (supplied).
Pin Configuration
C1 C2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
C3 C4
C5
SERIAL PORT IN/OUT TERMINAL
Pin Configuration
Connect serial port output terminal of computer to this terminal with Serial Cable (not supplied).
5 4 3 2 1
9 8 7 6
USB PORT TERMINAL
Pin Configuration
Connect USB port output terminal of computer or peripheral equipment to this terminal with USB port Cable (not supplied).
2 1
3 4

CONFIGURATIONS OF TERMINALS

C1 Analog Red Input
C2 Analog Green Input
C3 Analog Blue Input
C4 Analog Horiz. sync
C5 Analog Ground (R/G/B)
1 T.M.D.S. Data2–
2 T.M.D.S. Data2+
3 T.M.D.S. Data2 Shield
4 No Connect
5 No Connect
6 DDC Clock
7 DDC Data
8 Analog Vert. sync
1 -----
2 RxD
3 TxD
4 -----
5 Ground
6 -----
7 -----
8 -----
9 -----
1 Vcc
2 - Data
3 + Data
4 Ground
9 T.M.D.S. Data1– 17
10 T.M.D.S. Data1+ 18
11 T.M.D.S. Data1 Shield 19
12 No Connect 20
13 No Connect 21
14 +5V Power 22
15 Ground (for +5V) 23
16 Hot Plug Detect 24
APPENDIX
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
49