Connecting To Video Equipment - Sanyo PLV-HD100 Owner's Manual

CONNECTING TO VIDEO EQUIPMENT

Cables used for connection
✽
• Video Cable (BNC)
• Audio Cable (RCA x 2) ✽
• Scart Cable ✽
✽
• DVI-VGA Adapter
( ✽ = Cables are not supplied with this projector.)
Video Source (example)
Video Equipment with
Digital video signal output
Digital Video Output
BNC Cable
DVI
SDI IN 1/SDI IN 2
SERIAL PORT IN
SERIAL PORT OUT
R/C JACK USB
AUDIO OUT
R L
(MONO)
AUDIO OUT
Audio Cable
Video Equipment with
SDI signal output/input
SDI Output SDI Input Component Video Output
Pr/Cr
BNC Cable ✽
✽
Pr/Cr-Y-Pb/Cb
SDI OUTPUT
SDI IN1 SDI IN2 SDI OUT
R/Pr G/Y B/Pb
DVI
RESET
(Stereo) ✽
Audio Input
CONNECTING PROJECTOR
NOTE :
When connecting cable, power cords of both a
projector and external equipment should be
disconnected from AC outlet. Turn a projector
and peripheral equipment on before computer is
switched on.
Component video output equipment.
(such as DVD player or
high-definition TV source.)
RGB Scart
21-pin Output
Y Pb/Cb
DVI-VGA
Adapter
✽
DVI
AUDIO CONTROL PORT
H/HV V
R L
(MONO)
CONTROL PORT
AUDIO
R L
(MONO)
External Audio Equipment
Audio Amplifier Audio Speaker (stereo)
Audio Output
R L
Audio Cable
Scart
(Stereo) ✽
Cable ✽
AV AUDIO IN
Terminals of
a Projector
15