Installation; Lens Installation; Positioning Projector - Sanyo PLC-XF71 Owner's Manual

Lens Installation

Before setting up the projector, install Projection Lens on the projector.
Before installation, check where the projector is used and prepare a suitable lens. For the specifications of
Projection Lens, contact sales dealer where you purchased the projector.
- Do not use the optional lens below for this projector . Otherwise damages may result .
LENS MODEL NO . : LNS-T01, LNS-T01Z
- Lens installation and replacement should be made by the qualified service personnel .
- When setting the projector after lens installation, be sure to replace a Lens Cap to protect a
surface.
- When carrying or holding up the projector, be careful not to put your hands on lens part. It may
damage lens, cabinet, or mechanical parts.

Positioning Projector

This projector is designed to project on a flat projection
surface.
Note:
✔
• Brightness in room has a great influence on picture quality.
It is recommended to limit ambient lighting in order to
provide the best image.

Installation

SCREEN
17