Configurations Of Terminals - Sanyo PLC-XF45 Owner's Manual

DVI-I TERMINAL (DIGITAL/ANALOG)
This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to
this terminal with DVI cable (supplied).
Pin Configuration
C1 C2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
C3 C4
C5
HDB 15-PIN TERMINAL (ANALOG)
Connect display output terminal of computer to this terminal with VGA Cable (supplied).
When connecting Macintosh computer, use MAC/VGA Adapter (supplied).
When connecting Analog signal from DVI terminal of computer to this terminal, use DVI/VGA Adapter (supplied).
Pin Configuration
5 4 3 2 1
10
9 8 7 6
15
14 13 12 11
CONTROL PORT CONNECTOR
Terminal : Mini DIN 8-PIN
Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with Control Cable (supplied).
Pin Configuration
8 7 6
5 3
4
2 1

CONFIGURATIONS OF TERMINALS

C1 Analog Red Input
C2 Analog Green Input
C3 Analog Blue Input
C4 Analog Horiz. sync
C5 Analog Ground (R/G/B)
1 T.M.D.S. Data2–
2 T.M.D.S. Data2+
3 T.M.D.S. Data2 Shield
4 No Connect
5 No Connect
6 DDC Clock
7 DDC Data
8 Analog Vert. sync
1 Red Input
2 Green Input
3 Blue Input
4 Sense 2
5 Ground (Horiz.sync.)
6 Ground (Red)
7 Ground (Green)
8 Ground (Blue)
PS/2 Serial ADB
1 ----- R X D -----
2 CLK ----- ADB
3 DATA ----- -----
4 GND GND GND
5 ----- RTS -----
6 ----- T X D -----
7 GND GND -----
8 ----- GND GND
9 T.M.D.S. Data1– 17
10 T.M.D.S. Data1+ 18
11 T.M.D.S. Data1 Shield 19
12 No Connect 20
13 No Connect 21
14 +5V Power 22
15 Ground (for +5V) 23
16 Hot Plug Detect 24
9 +5V Power
10 Ground (Vert.sync.)
11 Sense 0
12 DDC Data
13 Horiz. sync.
14 Vert. sync.
15 DDC Clock
APPENDIX
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
51