AEG KO-LAVAMAT 74335 User Information page 31

Problem
Fabric softener was not
washed into machine;
drawer æ for condi-
tioner is filled with wa-
ter.
Washing is heavily
creased.
Washing has not been
spun properly. Water is
left in the drum.
RINSE display is flash-
ing.
Possible Cause
The conditioner insert has
not been correctly positioned
inside the conditioner com-
partment or is blocked.
Probably too much washing
was put in the drum.
Drain hose is kinked.
Maximum pump head (outlet
head 1m from unit's floor
surface) exceeded.
Drain pump is blocked.
If siphon is connected: si-
phon blocked.
Operating Instructions
Solution
Clean the detergent dis-
penser drawer and attach the
conditioner securely.
Follow instructions for the
maximum load quantity (see
Programme Tables). For easy-
care fabrics select the EASY
IRON programme.
Remove the kink.
Contact your local Service
Force Centre; a conversion
kit is available as a special
accessory for pump heads
over 1m.
Switch off the appliance and
pull out the mains plug.
Clean the drain pump.
Clean the siphon.
31