Table of Contents
Advertisement
3.6 Function setting
01: Output voltage
LCD Display
02: Other functional setting
02-1: Expert Mode (EP)
LCD Display
Setting
1. Press the function setting button
the setting page. Press the page turning buttons till the setting
page of output voltage, and the word "OPU" flashing.
2. Press confirmation button
setting page of output voltage OPU. The "OPU" words light on,
and the numbers by left side of OPU keeps flashing. Press page
turning buttons
voltage value, the optional voltage values are 208V, 220V, 230V
and 240V. The default output voltage is 220V. Please save after
setting.
3. Turn to the voltage value which you need, and press
confirmation button
The number by left side of OPU will keep lighting on, no flashing.
4. Press functional setting button
setting page and back to the home page.( Or no operation,
waiting more than 30 sec, the page will come back to home page
automatically).
Note: When the output voltage setting with 208V, the output
needs to decrease to 90% of rated power.
Setting
The expert mode setting with ON, then go to the functional
setting page again. The functional setting will show battery QTY
(PCS), EPO, charging current and other items can be selected.
When the expert mode setting with OFF, functional setting page
will show only the general options.
Note: The expert mode default to OFF. When setting as ON then
re-connected the AC power, the EP can be recovered as OFF.
12
0.5-2 sec, then go to the
or
0.5-2sec to choose different output
0.5-2sec, then finish the OPU setting.
over 2 sec, then go to
over 2 sec, quit the
Advertisement
Table of Contents
