Table of Contents
Advertisement
Specifications
15
The probe and oscilloscope should be warmed up for at least 20 minutes before any testing and the
environmental conditions should not exceed the probe's specified limits.
NOTE
All entries included in the following tables are characteristics unless otherwise stated.
Toutes les entrées incluses dans les tableaux suivants sont des caractéristiques, sauf
REMARQUE
indication contraire.
Table 2
Safety Specifications
Parameter
IEC/EN 61010-031:2015
Table 3
Electrical Specifications (Not Warranted)
Parameter
Maximum Input Voltage
Maximum Loading Current
Attenuation
Bandwidth
Rise Time
Input Resistance
Input Capacitance
Accuracy
Temperature Coefficient
Compensation Range
Condition
Measurement Category other than II, III, or IV (formally CAT I)
Characteristic
10 kV (DC + ACpeak)
7 kV (ACrms)
100 µA
1000x
DC to 40 MHz (-3 dB)
≤ 8.8 ns
100 MΩ ± 5%
2.0 pF
± 3% (below 10 kV) DC
± 3% at 1 kHz VAC
± 3 dB 0 to 40 MHz VAC
≤ 200 ppm/°C
5 pF to 50 pF
CT4432 10 kV High-Voltage Oscilloscope Probe User Manual
Advertisement
Table of Contents
