Graco 24N351 Instructions

Instructions
Patch Cable
Patch cable used with G3 pump to power vent valve accessory.
Important Safety Instructions
Read all warnings and instructions in this
manual and in the G3 Pump instruction man-
ual. Save all instructions.
Part No.: 24N351
Patch Kit Parts
Description
CABLE Accessory
▲ TAG, warning
▲ Replacement Danger and Warning labels, tags and
cards are available at no cost.
ELECTRIC SHOCK HAZARD
This equipment must be
ing, setup, or usage of the system can cause electric
shock.
If the plug is not correctly connected to the G3 pump as
shown in F . 1, the user could be seriously injured due
IG
to electric shock and/or the pump could be significantly
damaged
• Turn off and disconnect power at main switch before
disconnecting any cables and before servicing
equipment.
• Connect only to grounded power source.
• All electrical wiring must be done by a qualified elec-
trician and comply with all local codes and regula-
tions.
Qty
1
1
grounded. Improper ground-
Connector on G3 housing
(2)
(3)
(1)
1 LINE
2 NEUTRAL
3 Not Used
4 GROUND
F . 1
IG
3A2796A
Patch Cable
1
4
(4)
EN
2