Sanyo VPC TP1000 Instruction Manual page 47

3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Tap / to select the image that you want
to print .
Tap +/- to select the number that you want
to print (up to 99) .
4. Tap [ ].
5. Drag the slide bar down to the end of the menu.
Tap [Print].
6. Tap [Execute] to start printing.
7. The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
If an error is detected during the connection
(i.e. a printer hardware problem) between
camera and printer, [PRINT ERROR] will be
displayed.
If an error
communication (i.e. wrong setting on the camera) between camera and printer,
[ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.
EN-46
is detected during the