Setup Menu - Sanyo VPC TP1000 Instruction Manual

Setup Menu

Set your camera's operating environment.
1. Tap the Mode / Scene mode icon to set the camera to any scene mode; or press the
button.
2. Press the MENU button.
3. Drag the slide bar down to the end of the menu. Tap [
4. Tap the submenu of the desired option item, and tap the desired setting.
5. To exit from the menu, press the MENU button.
Date/Time
Refer to the section in this manual titled "Setting the Date and Time" (page 17) for
further details.
Language
Refer to the section in this manual titled "Choosing the Language" (page 18) for further
details.
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful for reducing battery usage.
* 1 Min. / 2 Min. / 3 Min. / Off
Beep
This sets whether or not to mute the camera sound each time you press the camera's
buttons.
* On / Off
Display
This sets the image information display state.
* Default / All / Off
Fr. No. Reset
This creates a new folder. The captured images are recorded to the newly created
folder from number 0001.
* Cancel / Execute
EN-38
Setup
Beep
On
Display
Default
Fr. No. Reset
Next Menu
] to enter [Setup] menu.