Lewitt LCT 1040 Manual
  1. Manuals
  2. Brands
  3. Lewitt Manuals
  4. Microphone
  5. LCT 1040
  6. Manual

Lewitt LCT 1040 Manual

Hide thumbs

Advertisement

Table of Contents

LCT 1040
Manual
Check out the
setup video.
lewitt-audio.com/lct-1040-setup

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LCT 1040 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lewitt LCT 1040

Summary of Contents for Lewitt LCT 1040

  • Page 1 LCT 1040 Manual Check out the setup video. lewitt-audio.com/lct-1040-setup...

  • Page 2: Table Of Contents

    Contents About the LCT 1040 About the LCT 1040 ..................1 The LCT 1040 is a microphone system with a The LCT 1040 is a studio condenser microphone • Gold-sputtered 1" true condenser capsule What’s included ....................2 comprehensive set of options to dial in the perfect using both, FET and tube circuitry.

  • Page 3: What's Included

    Register your and simply scan the code reduce plosives to open the setup video. product and Tube microphone with 1" true condenser capsule lewitt-audio.com/lct-1040-setup extend your Shock mount that reduces low-frequency rumble and warranty to 10 structure-borne noise Front Back Side years for free.

  • Page 4: Settings And Indicators

    Settings and indicators Tube LEDs on remote Change the tube characteristic. Power: Indicates that the system is turned on. The • Clear: Tube works at technical optimum. LED turns red in Sleep mode. • Warm: Smooth and pleasant high-end. Microphone: Microphone is connected. •...

  • Page 5: Connectors

    Connectors Preparing the microphone for recording Mount the shock mount onto a stable microphone Sleep Remote stand. Open the fixture of the shock mount. Put Hold to put the system Connect a standard the tube microphone in the shock mount. The into sleep mode/wake 3-pin XLR cable to tube window indicates the default front.

  • Page 6: Stacked Remote Setup

    Stacked remote setup Standard XLR cable The LCT 1040 consists of three parts: the microphone, the PSU, and the remote. The remote is attached to the PSU by default (no cable needed). Connect to your preamp, Connect the microphone via the 10-pin cable.

  • Page 7: Detached Remote Setup

    Detached remote setup You can detach the remote from the PSU and Connect the microphone to the PSU via the use it without any drawbacks in sound quality. 10-pin cable. Connect the PSU to the remote via This is perfect when you have a separate control standard XLR cable.

  • Page 8: Faqs

    • The casing of the LCT 1040 can be cleaned for help. Technically, no. For the sake of treating your The signals stay purely in the analog domain. easily using a wet cloth, never use alcohol or...
  • Page 9 If you have any further questions, please get in touch. We look forward to hearing from you. lewitt-audio.com/contact...

Table of Contents