Advertisement
Try to use shielded cables. Higher density shielding gives better results.
Try to select balanced connections. This will reduce any noise interference.
When using unbalanced cables, always use the shortest possible - preferably not more than 3 m.
Avoid putting unbalanced cables near AC power lines otherwise undesirable noise could happen.
Before changing any connections, please turn off all equipment. Otherwise, it may cause damage
to hearing and connected speakers.
Before installation, make sure that the power cord is not connected to
the power outlet; the power switch is turned off; the volume knob is
completely closed (counter clockwise to the limit).
8Ω
4Ω
8Ω
4Ω
8Ω
STEREO
8Ω
4Ω
8Ω
4Ω
BRIDGE
8Ω
MONO
Advertisement
