Table of Contents
Advertisement
REAttACHinG tHE REFRiGERAtoR DooRs
4. Connect the water line (
on the coupler with pulling tube. Connect the one
connector(
) on left side door and two connectors
4
(
) at each side of the top cap.
3
The clip is enveloped inside of the top cap.
5
The water line (
) must be fully inserted to the marked line to prevent
5
water leakage from the dispenser.
CAUTION
5. Position the Top Table (
With a philips head screwdriver, insert and tighten the
3 screws into the Hinge Cover. With the door opened,
reinsert the Hinge Cover cap (
When reattaching the hinge cover, make sure that the
wires are not pressed or damaged by the hinge cover.
) and then insert a clip
5
) in place.
2
) and close the doors.
1
3
4
coupler
1
3
2
Setting Up _13
Hide quick links:
Advertisement
Table of Contents
