Installing The Water Line - Samsung RFG297AAWP User Manual

instAllinG tHE wAtER linE

Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
You may fi nd these items sold as a kit at your local hardware store.
1/4" compression nut
plastic tubing
1. Slip the compression nut
2. Tighten the compression nut
- If you are using copper tubing, slip the compression nut
copper tubing (not included) as shown.
- If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the
compression fi tting.
Do not use without the molded end(Bulb) of the plastic tubing .
CAUTION
3. Tighten the compression nut
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug,
leak-free connection.
installing the water fi lter.
1. Remove the water fi lter cover(
2. Remove the fi xed cap by turning it counter clockwise. Keep
the cap in a safe place for later use if you don't use the fi lter.
3. Remove the water fi lter from the box and put a replacement
indicator sticker on the fi lter as shown. Place the sticker on
the fi lter that dates six months in the future. For example, if
you install the water fi lter in March, put the "SEP" sticker on
the fi lter to remind you to replace it in September. That way
you'll know when it is time to replace the fi lter. Normally, a fi lter
life is about 6 months.
copper tubing
ferrule
through the supplied plastic tubing .
onto the 1/4" compression fi tting.
onto the compression fi tting. Do not over-tighten the compression nut .
)
1
Refrigerator
Plastic tubing
(Supplied)
Ferrule
(Not supplied)
Copper tubing Plastic tubing
or
(Not supplied) (Not supplied)
Household water line
(not included) and ferrule (not included) on
2
Compression nut
(1/4") (Supplied)
Compression fi tting
(Supplied)
Bulb
Compression nut
(1/4") (Not supplied)
1
3
Sticker
(month indicator)
Setting Up _19 Setting Up _19