Advertisement
6a. (Only if optional STEEL PERFORATED modesty
panel was ordered.) Align the perforated modesty
panel ⑦ with the five staggered threaded inserts
in the top ①. The modesty panel will be located
towards the back side of the base cabinet. Using a
4mm Allen wrench or 4mm hex bit and screw gun,
fasten modesty panel to top with 1/4"-20x15mm joint
connector bolts.
6b. (Only if optional LAMINATE modesty panel was
ordered.) Align the laminate modesty panel ⑥ with
the two most inner staggered threaded inserts
in the top ①. The modesty panel will be located
towards the back side of the base cabinet . Attach
L-brackets with pan head Phillips screws to secure
modesty panel in place. Using (1) L-bracket, attach
the end of the modesty panel. Use (2) L-brackets to
attach long side of panel to top. (See image for the
approximate location.) Use final L-bracket to attach
panel on opposite side to the top.
wibenchmfg.com
ASSEMBLY
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
7. With assistance, turn desk upright.
8. Place drawers back in unit. Flip wire pulls to front.
NOTE: Keys for drawer locks will be taped to
the inside of the drawers.
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
3
Advertisement
