Advertisement
PA-CB-2 Large Sliding Camera Blockers
STEP 1: Clean camera surface and surrounding using manufacturer's recommended methods.
STEP 2: Check for fit/compatibility with device and PIVOT case before final application.
STEP 3: Remove PA-CB-2 adhesive backing, align the hole on the sliding camera blocker with
device camera and lightly place blocker into position.
STEP 4: Test for proper function and adjust if necessary. Press firmly when complete.
!
Pro Tip!
Is intended for use on front facing cameras. Also remeber to adjust
ambient light sensor setting in the device menu after installing.
Remove adhesive backing
page: 05
Advertisement
