Changing The Screen Size; Freezing The Picture - Samsung PPM42S2 Owner's Instructions Manual

Changing the Screen Size

(When entering the Video mode)
When you press the Aspect or Scaling(RGB mode) button on the remote control, the PDP's screen
mode should appear in sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2,
Stretch, 4:3.
Wide
Sets the picture to 16:9 wide mode.
Panorama
Use this mode for the wide aspect ratio of a
panoramic picture.
Zoom1
Magnifies the size of the picture vertically
on screen.
Note
• If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned onto
the screen, view the monitor in wide or panorama mode as much as possible.
• In VIDEO, S-VIDEO and Component1 modes, all screen modes can be selected.
(Wide Panorama Zoom1 Zoom2
• In RGB mode, Wide and 4:3 screen modes can be selected.
• The 4:3 mode does not work with input signals from Component2 sources (Set-top box or
DVD players-480p/720p/1080i).
34
Zoom2
Magnifies the size of the picture more than
Zoom1.
Stretch
Using this mode, magnify the picture vertically
and horizontally to be bigger than the picture
in Zoom2.
4:3
Sets the picture to 4:3 normal mode. This is a
standard PDP screen size.
Stretch 4:3).

Freezing the Picture

Still
Press the Still button on the remote control to freeze a mov-
ing picture. Press again to cancel.
35