Install The Stand - Samsung BN68-02712A-06 User Manual

Input Cables (Sold Separately)
HDMI
See separate guide for installing the stand.
Stand (1EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using four screws (M4 X L8) as shown.
2. With your TV upright, connect the TV to the Stand.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
one side.
[UC8000-NA]BN68-02712A-06L03.indb 5
HDMI-DVI Component

Install the Stand

Guide Stand (1EA)
Screws (M4 X L8)
Guide Stand
Stand
Rear
Composite (AV) Coaxial (RF)
Top view
Front
Rear
2
Screws (M4 X L8)
1
3. Fasten two screws (M4 X L8) at position 1, and then
fasten three screws (M4 X L8) at position 2.
VGA
9EA (M4 X L8)
Screws (9EA)
5
English
2010-09-01 오전 10:46:51