Page 1
Model No. BF601 Owner’s Manual 6" Heavy Duty Bench Buffer QUESTION... Visit us on the web at powertecproducts.com You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future reference.
SAFETY RULES TOOL MAINTENANCE WARNING WARNING • Turn the machine "OFF", and disconnect the machine For your own safety, read and understand all warnings from the power source prior to inspection. and operating instructions before using any tool or • Maintain all tools and machines in peak condition. Keep equipment.
SPECIFIC SAFETY RULES FOR BENCH BUFFER Be aware of general power tool safety. Make sure all the • The warnings, precautions, and instructions discussed safety rules are understood. in this instruction manual cannot cover all possible conditions and situations that may occur. •...
ASSEMBLY UNPACKING TOOLS NEEDED Refer to Figure 1 You will need the following tools to assemble and adjust the machine. (The tools are not included.) • Check for shipping damage. Check immediately whether all parts and accessories are included. The bench 19 mm wrench or adjustable wrench buffer itself comes assembled as one unit.
POWER SOURCE WARNING Do not permit fingers to touch the terminals of plug when WARNING installing or removing from outlet. Do not connect to the power source until the machine is • Inspect tool cords periodically, and if damaged, have it completely assembled.
OPERATION The following section is designed to give instructions on 2. Place the ON/OFF switch in the ON position to turn on the basic operations of this bench buffer. the unit. 3. Using two hands, firmly hold the workpiece and gently CAUTION move it into contact with the buffing wheel.
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION Motor does not run. 1. Machine not plugged in. 1. Plug power cord into electrical receptacle. 2. Power switch in OFF position. 2. Place ON/OFF switch to ON position. 3. Power cord is faulty. 3.
30- DAY SATISFACTION GUARANTEE POLICY During the first 30 days after the date of purchase, if you are dissatisfied with the performance of this POWERTEC tool for any reason, you may return the tool to the retailer from which it was purchased for a full refund or exchange. You must present proof of purchase and return all original equipment packaged with the original product.