Buttons Introduction - Bresser 7510100 Instruction Manual

!
To get accurate displays, please keep the devices away from any unusual heat or cold place and
make sure the other sensors are also protected from direct sunlight, rain, or any heat places.
*Indoor Comfort Level Indicator
DRY: Humidity ≤40%
COMFORT: 40% ≤ Humidity ≤ 70%
20℃ (68°F) ≤ Temperature ≤ 28℃ (82.4 °F)
WET: Humidity ≥ 70%
The Comfort Level Indicator will not display on LCD :
Humidity ≤ 40% , Humidity ≤ 70% , Temperature > 28℃ (82.4 °F) or Temperature < 20℃ (68°F)
*Weather Forecast
The weather data obtained from the network, will be displayed synchronously after set the
home location information on the APP.
Sunny Partly Cloudy
Notes:
• IT IS NOT THE CURRENT WEATHER.
• Please note that this forecast can't compare with professional weather services supported by
satellites and high-performance computers.

1.4.2 Buttons Introduction

Buttons
[SET]
[+ / ]
[�]
[SENSOR]
[ ]
Cloudy
Functions
Normal Mode:
• Press and hold to enter manual setting mode.
Normal Mode:
• Press and hold to enter intelligent pairing mode,
• Press and hold again to switch the AP pairing mode.
Manual Setting Mode:
• Press to increase value,
• Press and hold to increase continuously.
Manual Setting Mode:
• Press to decrease value.
• Press and hold to decrease continuously.
Normal Mode:
• Press to switch channel,
• Press and hold to reconnect.
Normal Mode:
• Press to enter Backlight Brightness Function.
• Press and hold to turn ON/OFF Automatic Backlight function.
Manual Setting Mode:
• Press to exist.
Rainy Snowy Night
7