Position Of Soil Sensor; App Functions; Set Weather Data; Set Weather Station Gateway - Bresser 7510100 Instruction Manual

Homgar devices
Hide thumbs Also See for 7510100:
Table of Contents

Advertisement

Available languages

Available languages

1.6.3 Position of soil sensor

• After pairing and before using, please remove the black plastic protectors from the probes.
• Ensure the soil sensor is placed no more than 30 meters line of sight from the tap timer.
• If the soil is very compressed, it is recommended to soften up the soil by adding water before inserting.
• Ensure the probes are fully buried inside the soil.
• Ensure there is adequate drainage around the sensor.

2. App Functions

2.1 Set Weather Data

Setting Order: "•••" (Home page) → "Location" → "Get location" → "Save".
After the successful setting, the weather station gateway will synchronously update the
weather forecast data, consistent with the family weather (It will obtain the weather data
through the network and update every hour).

2.2 Set Weather Station Gateway

• Sensor NO. Settings: set channel 1/2/3 sensor, adjust the sorting of channel 4-9.
Click "
", "
" and "
display, click "Re-add".
• Device Replacement: If the device is faulty, you can use the Device Replacement function to
replace the defective device with the new one. Please pair the new device first, then select
"Device Replacement" to replace the device as prompted by the APP.
• Receive Channel: The default channel is channel 1. If there are more gateways in an area, for
example a neighbor uses the same model's gateway, you can set different receiving channels
to reduce the probability of communication conflicts.
➊ „All devices": add the sub devices, check sub devices data.
➋ "Charts": check curve chart of 24 hours / 10 days/More.
Tip: Click the down button to select and switch to the item you need.
➌ Enter setting page to edit the device name, view device information
set the display language of the weather station gateway, adjust
Automatic backlight, and so on.
Tips:
• UI DIY: set the background image and front color at lower right
corner of "UI DIY" page.
• Automatic Backlight: set automatic backlighting time periods and
backlight levels.
• LCD Language: set the Weekday abbreviation in 7 Languages on
weather station gateway.
" to resort and exit. To re-add a device that has been removed from
13

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

751020079101007910101791010279101037910104

Table of Contents