Hartman Singapore 69125012 Assembly Instructions

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE.

ATTENTION:

1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
3. DO NOT use power tools
4. Please allow 30 minutes for assembly.
5. Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled.

ASSEMBLY STEPS:

1. LOOSELY attach leg frame (B) to table top (A) with big bolts (D) & big flat washers (F) & big lock washer (H) for the two outer bolt holes
and the small bolts (C), small flat washers (E) & small lock washer (G) for the four middle bolt holes, using spanner (I) DO NOT
TIGHTEN BOLTS AT THIS STAGE
2. Tighten all bolts using spanner one by one being careful not to over tighten any as this will cause the thread to become damaged
3. Turn table top over and place in desired position.
4. Place parasol bungs & reducers (J) in the hole on table top.
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html
Component's

Parts List

Parts Picture
A
B
C
D
For Replacement Or Lost Spare Parts please go to
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product.
ASSEMBLY INSTRUCTIONS
220 x 100cm Singapore Rectangular Table
(
Q'ty
Description Part no
Table Top 1 69125012A
Leg frame 2 69125012B
M6*40mm 8 20021682
bolts
M8*40mm 12 2002183
bolt
http://faq.hartmanuk.co.uk/spares/
69125012 )
Fixings
Parts list Parts Picture
E
F
G
H
I
J
Q'ty
Description Part no.
1241162
Small Flat 8
washers
Big Flat 12 1061162
washers
Small Lock 8
Washers 1221162
Big Lock 12 2100048
Washers
Spanner 1 2100049
M6-M8
Parasol 2100050
bungs & 3
reducers